BZRXD - 3,5-DINITROSALICYLIC ACID, CPD 47

  • MSDS: BZRXD
  • Manufacturer: SALSBURY CHEMICALS INC
  • Product Name: 3,5-DINITROSALICYLIC ACID, CPD 47
  • National Stock Number: 6810-00N066398
Product Identification

Product ID:3,5-DINITROSALICYLIC ACID, CPD 47
MSDS Date:02/04/1994
FSC:6810
NIIN:00N066398
MSDS Number: BZRXD

Responsible Party
SALSBURY CHEMICALS INC
1205 ELEVENTH ST
CHARLES CITY, IA 50616
US

Emergency Phone: 800-424-9300(CHEMTREC)

Info Phone: 515-257-1000

Cage: JO206

Contractor
SALSBURY LABORATORIES
CHARLES CITY, IA 50616 US

Telephone: 515-257-1000

Cage: 1V177

Ingredients

SALICYLIC ACID, 3,5-DINITRO-; (3,5-DINITROSALICYLIC ACID)

CAS: 609-99-4

RTECS: VO2965000

Fraction By Weight: 100%

OSHA PEL N/K

ACGIH TLV: N/K


PROVIDED BY AIR PURIFYING RESPS IS LIMITED. USE

RTECS: 9999999ZZ


IS ANY POTNTL FOR UNCONTROLLED RELS, EXPOS LEVELS ARE

RTECS: 9999999ZZ


RESPS MAY NOT PROVIDE ADEQ PROT. RESP PROT PROGRAM

RTECS: 9999999ZZ


FOLLOWED WHENEVER WORKPLACE CONDITIONS WARRANT A

RTECS: 9999999ZZ

Hazards

LD50 LC50 Mixture:LD50(ORAL, RAT):860 MG/KG
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MAY CAUSE EYE, SKIN AND RESPIRATORY
IRRITATION. BREATHING:DUST MAY BE IRRITATING TO THE NOSE, THROAT
AND LUNGS. SKIN CONTACT:MAY CAUSE SKIN IRRITATION. EYE CONTACT:MAY
CAUSE EYE IRRITATION. INGESTION: MAY BE HARMFUL IF SWALLOWED.
CHRONIC:NOT KNOWN.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NOT KNOWN.

First Aid

First Aid:INHAL:REMOVE TO FRESH AIR. IF NOT BRTHG, GIVE ARTF RESP. IF
BRTHG IS DFCLT, GIVE OXYG. SEEK MED ATTN. SKIN:IMMED FLUSH W/LG
AMTS OF WATER FOR @ LST 15 MIN. USE SOAP IF AVAIL. REMOVE CONTAM
CLTHG, INCL UDING SHOES, AFTER FLUSHING HAS BEGUN. GET PROMPT MED
ATTN IF SYMPS OCCUR. THORO WASH/DISCARD CLOTHES & SHOES BEFORE
REUSE. EYES:IMMED FLUSH W/LG AMTS OF WATER FOR @ LST 15 MIN.
INGEST:GET (SUP DAT)

Fire Fighting

Extinguishing Media:CO*2, DRY CHEMICAL, ALCOHOL FOAM.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT . EVACUATE AREA AND FIGHT FIRE FROM SAFE
DISTANCE.
Unusual Fire/Explosion Hazard:NONE. EXPLOSION BY MECHANICAL IMPACT AND
STATIC DISCHARGE:NONE. CONDITIONS OF FLAMMABILITY:MATERIAL MAY
BURN, BUT DOES NOT IGNITE READILY. AVOID HIGH TEMPS.

Accidental Release

Spill Release Procedures:GEN:MATL SHOULD BE PVNTED FROM CONTAM
SOIL/FROM ENTERING SEWERAGE & DRAINING SYS & BODIES OF WATER.
ISOLATE HAZ AREA. KEEP UNNEC & UNPROT PERS FROM ENTERING. PVNT SKIN
& EYE CONT. SEE CTL MEASURES. SM SPILL:SWEEP/SCOOP MATL INTO CHEM
WASTE(SUP DAT)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:USE WITH ADEQ VENT. AVOID CONT WITH
SKIN AND EYES. FOLLOW ALL MSDS/LABEL PRECAUTIONS EVEN AFTER CNTNR
IS EMPTIED BECAUSE IT MAY RETAIN PROD RESIDUES.
Other Precautions:KEEP AWAY FROM HEAT AND FLAME. KEEP CONTAINER CLOSED
WHEN NOT IN USE.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPRVD AIR PURIFYING RESP MAY BE
PERMISSIBLE UNDER CERTAIN CIRCUMSTANCES WHERE AIRBORNE CONCS ARE
EXPECTED TO EXCEED EXPOS LIMS IF ESTABLISHED. CONSULT W/RESP MFR TO
DETERM APPROP TYPE OF E QUIP FOR GIVEN APPLICATN. PROT (ING 2)
Ventilation:USE PROCESS ENCLOSURES, LOCAL EXHAUST VENTILATION, OR OTHER
ENGINEERING CONTROLS TO CONTROL SOURCES OF DUST, MIST/VAPOR.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:ANSI APPRVD EMER EYEWASH & DELUGE SHOWER
USE CLEAN PROT BODY-COVERING CLTHG AS NEEDED TO MIN CONT W/CLTHG &
SKIN.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
FIRST AID PROC:IMMED MED ATTN. NEVER GIVE ANYTHING BY MOUTH TO AN UNCON
PERSON. SPILL PROC:CNTNR. AVOID RAISING DUST. SCRUB AREA
W/DETERGENT & WATER. LG SPILL:CLEAN UP SPILLS IMMED, OBSERVING
PRECS IN CTL MEASURES. VACUUM/SWEEP UP MATL & PLACE IN DISPOSAL
CONTAINER.

Chemical Properties

Melt/Freeze Pt:M.P/F.P Text:>336F,>169C
Vapor Density:HVR/AIR
Appearance and Odor:PALE YELLOW POWDER.

Stability

Stability Indicator/Materials to Avoid:YES
BASES AND OXIDIZING MATERIALS.
Stability Condition to Avoid:KEEP FROM CONTACT WITH OXIDIZING
MATERIALS, CAUSTIC AND/OR EXCESSIVE HEAT.
Hazardous Decomposition Products:PRODUCTS OF INCOMPLETE COMBUSTION MAY
INCLUDE CO, CO*2, AND NO*2 AND DENSE SMOKE.

Disposal

Waste Disposal Methods:WASTE AND CONTAINER DISPOSAL:DISPOSE OF IN
ACCORDANCE WITH ALL FEDERAL, STATE AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.